3mm Thickness Medium Gauge Sheet Metal Coil Slitter For Stainless Steel Coil

• Product Description

The 3.0-10.0 Medium Gauge Slitting Line is a versatile and high-performance steel coil slitting machine designed to handle a wide range of coil materials, including hot-rolled (HR), cold-rolled (CR), stainless steel (SS), galvanized (GI), and copper coils.

This slitting line is capable of processing coils with a thickness range of 3.0-10.0 mm and a maximum coil width of 2200 mm. It can produce 5-20 strips per coil, with a slitting accuracy of ±0.3 mm.

• Features and advantages

- Ф220 mm knife pivot diameter for precise and consistent slitting

- 40Cr knife pivot material for durability and long service life

- Blades with a specification of Ф220 mm x Ф360 mm x 20 mm, made of 6CrW2Si material

- PLC-based automatic control system for efficient and reliable operation

- Line speed ranging from 0 to 50 m/min, depending on the model

- Coil weight capacity of up to 30 tons (35 tons maximum)

• Technical parameters

Note: The above parameters are for reference. Customized slitting line as per customer's requirements and demands would be available.

• Process flow:

Entry coil car→Decoiler →Press and pinch device→Hydraulic cutter → Loop 1→Side guide device→ Double Slitter →Scrap winder→Loop 2 →Tension stand →Recoielr→Exit coil car

Following figure is standard for reference only.

• Applications

The FX-3-10mm*1800mm steel coil slitting line, also known as a medium gauge slitting line, finds applications in various industries that require processing materials of medium thickness.

Here's a simple introduction to the applications of the FX-3-10mm*1800mm steel coil slitting line:

Construction Industry: roofing, cladding, and structural components.

Shipbuilding: ship hulls, bulkheads, decks, and other structural elements.

Heavy Equipment Manufacturing: cranes, earthmoving machinery, and industrial machinery.

Oil and Gas Industry: pipelines, storage tanks, and other infrastructure.

Structural Steel Fabrication: buildings, bridges, and other infrastructure projects.

• Packaging & Shipping

Packaging:

All parts of the FX-3-10mm*1800mm steel coil slitting line are fixed inside container by steel wires and special PET straps, in order to make sure all parts will not move during transportation and avoid any kinds of damage of machine and container.

Shipping:

Sea Freight: The FX-3-10mm*1800mm steel coil slitting line is often shipped via ocean freight, especially for international transportation. The equipment is securely loaded into shipping containers or flat racks, which are then loaded onto cargo vessels. This mode is suitable for long-distance shipping and can accommodate larger and heavier slitting lines.

Air Freight: When there is a need for fast delivery or for shipping smaller or lighter slitting line, air freight can be used. The equipment is packed and loaded onto aircraft for transportation. Air freight is typically more expensive than ocean freight but offers quicker transit times.

• FAQ

Q1: What steel thicknesses can the FX-3-10mm*1800mm steel coil slitting line handle?

A: Typically 3mm to 10 mm in thickness.

Q2: What are the common applications for slit steel from this line?

A: Automotive parts, appliances, HVAC, construction, and metal fabrication.

Q3: What are the key advantages of this slitting line?

A: The key advantages of this slitting line include its ability to handle a wide range of cold-rolled steel materials, precise cutting accuracy, high production speed, and automated control system.

Q4: What is the maximum line speed?

A: The slitting line can operate at speeds up to 50 m/min, allowing for high production throughput.

Q5: What's the typical slitting width range?

A: Adjustable from 500mm to 2200mm.

Q6: What steel materials can the line accommodate?

A: A variety of cold rolled steel, galvanized steel, stainless steel, zinc aluminum magnesium steel coil.